Formule, ipotesi, fonti e limiti degli strumenti utilizzati per analizzare le decisioni finanziarie.
Introduzione
ARCA offre strumenti di supporto alle decisioni, non previsioni dei mercati e non garanzie di rendimento. Ogni strumento usa ipotesi e modelli diversi: questa pagina documenta le formule effettivamente implementate nel codice del sito, le principali assunzioni e i limiti delle simulazioni. Dove il comportamento del codice differisce da una formula “da manuale”, viene descritto il comportamento del codice.
Formulaciò che il codice calcola davvero
Ipotesiinput dell’utente, valori predefiniti, costanti del modello
Limiticiò che il modello non rappresenta
Interpretazionecosa si può e cosa non si può dedurre
Documentazione verificata sul codice del sito il 28 ottobre 2026. I numeri degli esempi sono quelli prodotti dagli strumenti con i valori predefiniti (o calcolati con le formule riportate): sono illustrazioni, non previsioni. Tutti i calcoli avvengono nel browser; i parametri inseriti non vengono inviati ad alcun server.
Panoramica degli strumenti
Dieci strumenti, di natura diversa. La classificazione riflette il funzionamento reale del codice.
Modello di asset allocation
ARCA Allocation
Problema
Ripartire un portafoglio tra obbligazioni, azioni e oro.
Blog, Impara e Libri sono contenuti editoriali, non strumenti: non eseguono calcoli e non sono documentati qui.
Modello di asset allocation
1. ARCA Allocation
Stima una ripartizione di riferimento tra obbligazioni, azioni e oro a partire da età, orizzonte, tolleranza dichiarata e quattro dati inseriti a mano (CAPE, rendimento reale obbligazionario, volatilità azionaria attesa, prezzo dell’oro).
Misura quanto l’investitore è vicino al pensionamento. È una funzione lineare a tratti, con picco di prudenza all’età di pensionamento (reverse glide path).
se a ≤ Apens: H = Hgiov + t·(Hpicco − Hgiov), con t = clip((a − 20) / max(Apens − 20, 1), 0, 1) se a > Apens: H = Hpicco − t′·(Hpicco − Htardi), con t′ = clip((a − Apens) / S, 0, 1)
Costanti nel codice: Hgiov = 2,5; Hpicco = 8,0; Htardi = 5,0. La forma è quindi una spezzata (sale in modo lineare fino al pensionamento, poi scende in modo lineare lungo S anni), non una curva liscia.
Passo 2 — Risk Capacity Score
RCS = clip(H · T, 1,5, 13)
T è la tolleranza dichiarata: 0,75 (Alta), 1,00 (Media), 1,30 (Bassa). Un T più alto aumenta RCS e riduce la quota azionaria. RCS è una calibrazione operativa, non una misura della vera avversione al rischio.
Passo 3 — Premio per il rischio e quota rischiosa (regola di Merton semplificata)
È la forma a singolo periodo della regola di Merton, w = (μ − r)/(γσ²), in cui ERP prende il posto di μ − r (l’earnings yield 1/CAPE è usato come proxy del rendimento azionario atteso reale, yr come rendimento dell’attivo sicuro) e RCS il posto del coefficiente di avversione γ. Il codice non risolve un problema di consumo e investimento intertemporale, non stima preferenze, non prevede leva né posizioni corte (limite 5–95%) e non usa correlazioni tra le classi di attivo.
P è il prezzo dell’oro in USD/oncia; 1397 è la media reale dal 1980 in dollari 2025 (fonte indicata: InflationData.com); 900 è una deviazione standard stimata dall’autore, non un dato pubblicato. Poiché GS è compreso tra −3 e +3, g varia in pratica tra 3% e 13%: i limiti 2% e 20% presenti nel codice non vengono mai raggiunti.
Passo 5 — Allocazione finale e intervallo
Azioni = (1 − g)·w* Obbligazioni = (1 − g)·(1 − w*) Oro = g
L’intervallo mostrato per le azioni si ottiene ricalcolando w* con CAPE × 1,15 e CAPE × 0,85 (variazione ±15%): non è un intervallo di confidenza statistico.
Variabili e ipotesi
Simbolo
Significato
Intervallo / predefinito
Origine
a
Età
20–90 anni; 45
Utente
Apens
Età di pensionamento
55–75 anni; 67
Utente
S
Durata del reverse glide path
5–20 anni; 12
Utente (incide solo dopo il pensionamento)
T
Tolleranza dichiarata
0,75 / 1,00 / 1,30
Utente
CAPE
Shiller P/E o equivalente
10–45; 28
Dato di mercato inserito a mano
yr
Rendimento reale obbligazionario di riferimento
−1% … 5%; 1,5%
Dato di mercato inserito a mano
σ
Volatilità azionaria attesa
8–35%; 16%
Assunzione dell’utente
P
Prezzo dell’oro
800–6000 USD/oncia; 4390
Dato inserito a mano (valore predefinito da aggiornare)
Lo slider “Profilo obbligazionario di riferimento” non entra nel calcolo: indica solo quale rendimento reale consultare. I dati di mercato sono inseriti manualmente; il codice prevede un punto di innesto per una futura fonte dati, oggi non attivo.
Esempio con i valori predefiniti. t = 25/47 = 0,532 → H = 2,5 + 0,532·5,5 = 5,43; con T = 1: RCS = 5,43. ERP = 1/28 − 1,5% = 3,57% − 1,50% = 2,07%. w* = 0,0207 / (5,43 · 0,16²) = 14,9%. zval = −3 (prezzo molto sopra la media, limitato a −3), zopp = −0,33 → GS = −1,67 → g = 8% − 1,67/3·5% = 5,2%. Risultato: obbligazioni 80,6%, azioni 14,1%, oro 5,2%; intervallo azioni 11,0%–18,4%. Con questi input il modello assegna poche azioni perché ERP è piccolo rispetto a RCS·σ².
Altri elementi dello strumento
Pannello “Come implementare con ETF UCITS”: divide le percentuali già calcolate (quota emergenti 0/10/15/20% dell’azionario; obbligazioni Global Aggregate EUR-hedged oppure titoli di Stato Eurozona) e mostra esempi di ticker a scopo illustrativo. Non fa parte del modello e non è una raccomandazione.
Grafico del reverse glide path: riapplica la stessa formula alle diverse età tenendo costanti dati di mercato, tolleranza e quota oro.
Condivisione e report: codificano i parametri nell’URL e producono una pagina stampabile; non aggiungono calcoli.
Limiti e interpretazione
Il risultato è un punto di riferimento derivato da una formula, molto sensibile agli input (soprattutto CAPE, yr e σ). Non è una previsione di rendimento, non tiene conto di fiscalità, patrimonio complessivo, liquidità necessaria, altri redditi o situazione personale, e non dimostra che l’allocazione indicata sia ottimale. La forma del glide path, le costanti 2,5/8,0/5,0, i limiti di RCS e della quota oro sono scelte di progetto.
Cosa è stato rimosso rispetto alle versioni precedenti
Le versioni precedenti usavano un rendimento azionario atteso fisso corretto da un legame con i tassi delle banche centrali (“TINA”), una modalità “Buffett Mode” con bonus discrezionale all’ERP, un Gold Score a sei fattori (rischio geopolitico, regime macro, volatilità, correlazione dinamica, oltre ai due attuali) e una funzione logistica per la quota oro. Sono stati sostituiti perché non ancorati a dati osservabili ripetibili o ridondanti: oggi l’ERP deriva direttamente da CAPE e rendimento reale, e il Gold Score ha due fattori.
Riferimenti: Merton (1969); Pfau & Kitces (2014); Jeske, ERN (2017); Moreira & Muir (2017); InflationData.com. Vedi Fonti per lo stato di ciascun riferimento.
Approfondimento concettuale
2. Lazy Portfolio
La pagina Lazy Portfolio è un testo editoriale: non contiene calcolatori, formule né parametri numerici propri, e non presenta backtest.
Che cos’è. Un’allocazione statica e diversificata in ETF a basso costo, ribilanciata periodicamente, senza market timing. La pagina cita come esempi Permanent Portfolio, Dedalo Three/Four/Eleven, Golden Butterfly, All Weather, Core Four e Two Funds, rimandando a Dedalo Invest per composizioni e backtest.
Statico e dinamico. Un’allocazione statica non cambia con età, orizzonte o condizioni di mercato; l’allocazione dinamica di ARCA (sezione 1) ricalcola i pesi quando cambiano età, orizzonte o dati inseriti. La pagina suggerisce di usare i pesi di ARCA come riferimento per i pesi target, ribilanciando una o due volte l’anno.
Limiti della staticità. Lo stesso rischio a 30 e a 65 anni; nessuna risposta a tassi o inflazione; il rischio di sequenza dei rendimenti (sezione 4) pesa di più vicino al pensionamento.
Limiti della dinamicità. Più parametri significano più possibilità di errore di calibrazione e di modificare le ipotesi per ottenere il risultato desiderato; la complessità va mantenuta nel tempo.
Ribilanciamento. Nessun calcolatore ARCA simula il ribilanciamento periodico di un portafoglio a pesi target, salvo l’ipotesi di pesi costanti ribilanciati ogni mese nel caso di studio 90/60 del Leverage Lab (sezione 7).
Interpretazione: la pagina argomenta che un lazy portfolio resta probabilmente una scelta robusta; è una posizione editoriale, non un risultato calcolato dal sito.
Modello di allocazione valutaria
3. Regione monetaria (Monetary Region Bias)
Stima la quota della componente azionaria da detenere nella valuta della propria regione monetaria (euro per l’Eurozona), in funzione dell’età. Non misura il peso di un Paese ma quello di una valuta; l’home bias tradizionale è geografico.
t = clip((a − 20)/70, 0, 1) s(t) = t²·(3 − 2t) GPEUR = clip(5% + 15%·s(t), 5%, 20%) e = clip(quota EUR già presente nell’indice, 0, 30%) da aggiungere = max(0, GPEUR − e) esposizione EUR totale = max(GPEUR, e) valute estere = 1 − esposizione EUR totale
Valori della curva: 20 anni 5,0%; 40 anni 8,0%; 60 anni 14,1%; 80 anni 19,2%; 90 anni 20,0%. Tutte le percentuali si riferiscono alla sola componente azionaria.
Categorie e ipotesi
Il codice distingue soltanto “EUR” e “valute estere” (aggregate). Il menu della valuta di riferimento elenca EUR, USD, GBP, CHF, JPY, CAD, AUD e Altro, ma solo EUR ha un calcolo: per le altre compare “Disponibile in una futura versione”. Non vengono usati Paesi.
La quota EUR già presente nell’indice globale (predefinito 9%, indicato come valore approssimato di FTSE All-World) è un input dell’utente: il modello non specifica se si riferisca alla valuta di quotazione dei titoli o all’esposizione economica e non la verifica.
L’esempio in euro applica le percentuali al capitale azionario inserito (predefinito 100.000 €).
Il “da aggiungere”, secondo il testo della pagina, si può ottenere con un ETF World EUR Hedged o con una moderata sovraesposizione all’azionario Euro Area: il calcolatore non determina quale strumento usare né l’effetto della copertura.
Esempio. Età 45: t = 25/70 = 0,357; s = 0,292; GPEUR = 5% + 15%·0,292 = 9,4%. Con quota EUR già presente al 9%: da aggiungere 0,4% (≈ 373 € su 100.000 €), esposizione EUR totale 9,4% (≈ 9.373 €), valute estere 90,6%.
Limiti e interpretazione
La forma della curva (smoothstep) e i limiti 5–20% sono scelte di progetto, non risultati empirici. Il risultato non è l’esposizione economica all’euro del patrimonio: la valuta di negoziazione di un ETF non coincide con la valuta in cui le sue aziende generano ricavi o costi, e il modello non calcola gli effetti di obbligazioni, oro, liquidità e coperture del cambio. Non è una previsione dei rendimenti né una raccomandazione personalizzata. La pagina cita Anarkulova, Cederburg e O’Doherty (2025), i cui pesi ottimali riguardano i mercati nazionali e non la valuta di denominazione: non sono direttamente confrontabili.
Calcolatore puntuale (primo anno)
4. SWR — Safe Withdrawal Rate
Confronta il prelievo del primo anno secondo quattro regole. È un calcolo deterministico: non simula gli anni successivi, non usa dati storici, sequenze casuali o Monte Carlo e non modella inflazione, rendimenti o ribilanciamenti.
Tasso iniziale di prelievo: percentuale del capitale iniziale prelevata il primo anno (la regola del 4%).
Importo aggiornato con l’inflazione: nella regola originale, gli anni successivi ripetono l’importo iniziale rivalutato per l’inflazione; lo strumento calcola solo il primo anno.
Prelievo percentuale del patrimonio corrente: importo che varia con il valore del portafoglio.
Strategia dinamica: modifica il prelievo al variare del patrimonio o del tasso di prelievo implicito (guardrail, ARVA).
Rischio di sequenza dei rendimenti: prelevare durante un ribasso nei primi anni può causare perdite permanenti; è una ragione per cui le regole differiscono, ma non è simulato dallo strumento.
Le quattro regole come implementate
Regola
Formula nel codice
Note
1. Spesa reale fissa (4%)
P₁ = 4% · K
K = montante residuo. Solo il primo anno; l’aggiornamento per inflazione non è calcolato.
2. Percentuale costante
P₂ = 5% · K
Aliquota fissa al 5%, non modificabile nell’interfaccia.
3. Guardrail
i = D/K; barriere 0,8·τ e 1,2·τ; se i > 1,2τ: P₃ = 0,9·D; se i < 0,8τ: P₃ = 1,1·D; altrimenti P₃ = D
D = spesa desiderata, τ = tasso iniziale scelto (3–7%). Versione semplificata: una sola verifica sul primo anno, senza le altre regole decisionali del metodo originale di Guyton e Klinger.
4. ARVA
PVFA = (1 − (1 + r)−n)/r; P₄ = K / PVFA
r = rendimento reale atteso (0–6%); n = speranza di vita residua, anche non intera, trattata come orizzonte certo. Se r ≈ 0, PVFA = n.
La speranza di vita n deriva da una tabella inserita nel codice (uomini e donne, ogni 5 anni da 20 a 100) con interpolazione lineare. La pagina riporta come ancoraggi ufficiali ISTAT 19,8 anni (uomini) e 22,6 (donne) a 65 anni; gli altri valori della tabella non sono stati verificati rispetto alle tavole ufficiali. Non è la tavola di mortalità completa.
Esempio con i valori predefiniti (uomo, 65 anni, K = 1.150.000 €, D = 30.000 €, r = 3%, τ = 5%): P₁ = 46.000 €; P₂ = 57.500 €. Guardrail: i = 30.000/1.150.000 = 2,61%, barriere 4,0%–6,0% → i è sotto la barriera bassa → P₃ = 33.000 €. ARVA: n = 19,8 → PVFA = 14,77 → P₄ = 77.871 € (6,8% di K). Le quattro cifre sono molto diverse perché rispondono a domande diverse, non perché una sia “più corretta”.
Limiti e interpretazione
Il 4% non è un tasso universalmente sicuro: lo storico di riferimento (Bengen; Trinity Study) riguarda specifici mercati, periodi, allocazioni e orizzonti. Lo strumento non stima probabilità di successo, capitale finale o rischio di esaurimento, e usando la speranza di vita media non copre il rischio di vivere più a lungo. Per queste valutazioni servirebbero simulazioni su traiettorie storiche e sintetiche, non incluse. Un risultato puntuale non è una promessa di sostenibilità nel tempo.
Simulazione deterministica
5. Accumulo vs Distribuzione
Confronta un ETF ad accumulazione (proventi reinvestiti nel fondo) con uno a distribuzione (proventi pagati all’investitore) a parità di rendimento totale. Il dividendo non è un rendimento aggiuntivo: il valore della quota scende dello stesso importo. Le differenze nascono da fiscalità, momento delle imposte e uso dei dividendi.
Accumulazione: Vt = C·(1 + r)t; imposta finale = tg·max(0, Vn − C) Distribuzione, ogni anno: Vpre = Vt−1·(1 + r); D = d·Vpre; imposta = td·D; netto Dn = D − imposta reinvestimento: Vt = Vpre − D + Dn; base fiscale += Dn incasso: Vt = Vpre − D; liquidità += Dn (non rende); base fiscale invariata Imposta finale = tg·max(0, Vn − base fiscale)
C capitale (1.000–10.000.000 €), n anni (1–50), r rendimento totale annuo (−5% … 15%), d dividend yield lordo (0–8%, misurato sul valore di fine anno prima dello stacco), td e tg aliquote su dividendi e plusvalenze (0–100%; predefinite 26%). Il rendimento della sola componente prezzo è (1 + r)(1 − d) − 1 ≈ r − d. In modalità “incasso” si confronta il patrimonio complessivo (portafoglio netto + dividendi netti incassati) e si calcola l’IRR dei flussi; il confronto riporta differenza = netto distribuzione − netto accumulazione.
Ipotesi del modello
Rendimento, dividend yield e aliquote costanti; costo fiscale medio aggregato; nessuna compensazione di minusvalenze (l’imposta non è mai negativa).
Non sono modellati commissioni, TER, inflazione, crescita dei dividendi, cambi, bollo o differenze tra categorie di reddito: le due aliquote sono semplificazioni, non la fiscalità di uno strumento reale.
La liquidità incassata non produce rendimento.
Esempio su 2 anni (C = 100.000 €, r = 7%, d = 3%, td = tg = 26%, reinvestimento). Accumulazione: V₂ = 114.490 €, imposta finale 3.767 €, netto 110.723 €. Distribuzione: anno 1 dividendo lordo 3.210 € (netto 2.375 €), V₁ = 106.165 €; anno 2 dividendo 3.408 € (netto 2.522 €), V₂ = 112.711 €; imposte sui dividendi 1.721 €, imposta finale 2.032 €, netto 110.679 €. Con i parametri predefiniti a 40 anni il netto è 1.134.110 € (accumulazione) contro 935.772 € (distribuzione). Ma cambiando le ipotesi cambia l’esito: con td = 10% e tg = 26% prevale la distribuzione (1.146.719 € contro 1.134.110 €). La scelta dipende dalle ipotesi, non solo dal tipo di ETF.
Interpretazione: il risultato misura l’effetto delle ipotesi inserite, non quello di prodotti reali. Non indica quale ETF “convenga” a una persona; se serve reddito periodico, la distribuzione risponde a un’esigenza di liquidità che il confronto sul solo patrimonio non cattura.
Simulazione / confronto
6. Bullet vs Barbell
Confronta due strutture obbligazionarie con la stessa duration: il Bullet concentra le scadenze in un punto; il Barbell le divide tra una gamba breve e una lunga. Usa un’approssimazione al secondo ordine su obbligazioni-tipo (proxy zero-coupon).
Convessità: C(D) = D·(D + 1) / (1 + y₀)² Pesi del Barbell: wL = clip((Dt − Ds)/(Dl − Ds), 0, 1); wS = 1 − wL Rendimento di prezzo: ΔP/P ≈ −D·Δy + ½·C·Δy² Bullet: Δy interpolato linearmente tra Δybreve e Δylungo in base a Dt Barbell: wS·R(Ds, Δybreve) + wL·R(Dl, Δylungo)
Il codice impone Ds ≤ Dt − 0,5 e Dl ≥ Dt + 0,5. Poiché C è convessa in D, a parità di duration il Barbell ha sempre più convessità del Bullet (disuguaglianza di Jensen). Variabili: Dt duration obiettivo (3–15; 7), Ds (0,5–10; 2), Dl (5–30; 15), y₀ rendimento di partenza usato solo per la convessità (0–8%; 3,5%), Δy in punti base (−300…+300).
Stima su cinque scenari (“Sharpe stimato”)
Shift paralleli p = z·σtassi con z ∈ {−2, −1, 0, +1, +2} e pesi 6,25%, 25%, 37,5%, 25%, 6,25% (approssimazione discreta di una normale); σtassi 25–250 punti base (100). In ogni scenario Δybreve = p − k/2 e Δylungo = p + k/2, dove k è l’inclinazione impostata (Δylungo − Δybreve). Quindi degli slider di scenario viene mantenuta solo l’inclinazione: il livello medio dello shock impostato non entra nei cinque scenari, centrati su 0 punti base. Il rapporto mostrato è E[R]/σ[R], senza sottrarre un tasso privo di rischio; E[R] contiene solo l’effetto di prezzo (no cedole né carry).
Esempio (Dt = 7, Ds = 2, Dl = 15, y₀ = 3,5%): wL = 5/13 = 38,5%; C(7) = 52,3; CBarbell = 89,6. Shift parallelo +100 bp: Bullet −6,74%, Barbell −6,55%; −100 bp: +7,26% contro +7,45% (vantaggio di convessità). Irripidimento (breve 0, lungo +100 bp): il Δy del Bullet interpolato è 38,5 bp → Bullet −2,65%, Barbell −5,34%: qui la struttura Bullet è favorita. Con i valori predefiniti: E[R] 0,26% (Bullet) e 0,45% (Barbell), σ ≈ 7,0% per entrambi.
Limiti. Il modello ignora cedole, carry, roll-down, rischio di credito, liquidità, costi e termini superiori al secondo; il Barbell non è sempre superiore (l’esempio mostra il contrario con un irripidimento). Il rapporto E[R]/σ non è un indicatore storico né annualizzato su dati reali: è una stima didattica che dipende da σtassi e dalla forma della curva scelta.
Simulazione su dati sintetici
7. Leverage Lab
Mostra come leva, volatilità, capitalizzazione e costi cambiano il risultato nel tempo. Usa rendimenti sintetici (non dati di mercato) e non rappresenta alcun prodotto reale. L’esposizione nozionale è il valore di mercato delle posizioni; il capitale è ciò che si possiede: una leva 1,5× non significa una perdita massima del 150%.
Per ogni periodo k (252 all’anno nelle sezioni B e C; 12 nella D) il rendimento logaritmico è: incremento della traiettoria deterministica del rendimento composto assegnato + σ·√Δt·(Wk − Wk−1), con W somma cumulata di normali standardizzate sul campione (media 0, deviazione standard 1, generatore con seed). La volatilità cambia il percorso, non il punto di arrivo: l’indice termina sempre al rendimento composto impostato. Lo scenario “ribasso e recupero” porta l’indice a −40% entro il primo quarto dell’orizzonte e poi lo fa risalire in modo lineare.
Strumento a leva (sezioni B e C)
a ogni periodo: E ← E·(1 + r); B ← B·(1 + f/ppy); V = E − B; V ← V·(1 − c/ppy) ogni k periodi: E ← L·V; B ← E − V
E esposizione, B debito, V valore netto, L leva (1–3), f costo annuo di finanziamento sulla parte a leva, c costo annuo dello strumento, ppy periodi all’anno. k = 1 equivale a un ETF a leva con obiettivo giornaliero (il moltiplicatore agisce sul rendimento di ogni giorno); k = 21 ribilanciamento mensile; k = 252 annuale. Se V si azzera, il modello si ferma (nessun recupero né margin call prima dell’azzeramento): con ribilanciamento giornaliero ciò accade se in un giorno l’indice perde 1/L o più.
Dipendenza dal percorso. Indice: +10% poi −10% → −1% complessivo; con 2× giornaliero: 10.000 € → 12.000 € → 9.600 € (−4%, non −2%). Con +10% e +10% l’indice sale del 21% e il 2× del 44%. Il risultato di una leva ribilanciata non è “leva × rendimento cumulato”.
La sezione C confronta due percorsi con lo stesso punto di arrivo e volatilità diverse (ETF 2× e 3× giornalieri). Il “volatility drag” (circa −½·L²·σ² all’anno) è solo un’indicazione di primo ordine; non implica che ogni strategia a leva perda valore nel lungo periodo. La leva μ/σ² mostrata come indicazione teorica è calcolata dai rendimenti giornalieri realizzati del percorso simulato: non è una raccomandazione.
Caso di studio 90/60 (sezione D)
Rendimenti mensili log-normali per azioni e obbligazioni con correlazione campionaria pari al valore impostato; stesso rendimento composto e stessa volatilità per costruzione. Portafoglio A: 60% azioni, 40% obbligazioni. Portafoglio B: 90% azioni, 60% obbligazioni e −50% di liquidità, remunerata al tasso a breve (cioè finanziamento implicito dei futures). Ogni mese: rendimento = wS·rS + wB·rB + wC·(tasso a breve/12) − costo strumenti/12, con pesi riportati ai valori obiettivo ogni mese e senza costi di ribilanciamento. La volatilità attesa dai parametri è √(wS²σS² + wB²σB² + 2wSwBρσSσB), con liquidità priva di rischio. Predefiniti: azioni 6,5% / vol 16%; obbligazioni 3,5% / vol 6%; ρ = 0; tasso a breve 3%; costi 0,10% (A) e 0,25% (B); 20 anni; 10.000 €.
Limiti. Nessun dato storico di NTSX o di altri prodotti; non sono modellati basis dei futures, margini, costi di roll, tracking error, imposte né liquidazioni forzate. Non confondere queste simulazioni con la performance reale di un ETF a leva, né attribuire a tutti i prodotti le regole di una struttura giornaliera. Il confronto non dimostra la superiorità di un portafoglio sull’altro: cambiando ipotesi e seed, il risultato cambia.
Simulazione / calcolatore
8. Calcolatore dei costi
Confronta la crescita di un capitale senza costi con quella al netto di TER, costo di sottoscrizione, costo di rimborso e custodia fissa. Il calcolo procede mese per mese (PAC mensile opzionale); il grafico mostra un punto per anno.
rm = (1 + g)1/12 − 1 (g = rendimento lordo annuo) senza costi: V ← V·(1 + rm) + PAC con costi: V ← V·(1 + g − TER)1/12 + PAC·(1 − s) − F/12, con V0 = C·(1 − s) e V ≥ 0 valore netto finale = Vn·(1 − u); costo totale = valore senza costi − valore netto
Il tasso mensile netto equivale a una riduzione dell’intero rendimento annuo di TER (g − TER, poi composto mensilmente). s = costo di sottoscrizione (applicato al capitale iniziale e a ogni versamento), u = costo di rimborso (una sola volta, alla fine), F = custodia annua in euro (divisa per 12). I versamenti PAC entrano a fine mese, dopo la crescita. Il TER è un costo annuo percentuale continuo; sottoscrizione e rimborso sono costi una tantum in percentuale; la custodia è un importo assoluto indipendente dal capitale.
La tabella “impatto isolato” ripete la simulazione attivando un solo costo alla volta: le voci non si sommano al costo totale perché i costi si compongono tra loro.
Esempio con i valori predefiniti (C = 100.000 €, g = 6%, 20 anni, TER 1,50%, sottoscrizione 2%, nessun PAC, rimborso 0, custodia 0): senza costi 320.714 € (= 100.000·1,06²⁰); con costi 236.348 €; costo totale 84.366 € (26,3%). Impatto isolato: TER 79.542 €; sottoscrizione 6.414 €; somma 85.956 € > 84.366 €.
Non modellati: spread denaro-lettera, commissioni di acquisto/vendita del broker, imposte, tracking difference e costi impliciti, inflazione, cambi. Il rendimento lordo è un’ipotesi dell’utente e i costi sono quelli inseriti: lo strumento non verifica che corrispondano a un prodotto reale. Misura l’effetto dei costi inseriti, non il costo totale di un investimento.
Confronto di dati
9. Confronto fiscale tra Paesi
Non è una simulazione fiscale: legge il file paesi-tasse.json e mostra, per due Paesi scelti, schede affiancate con i valori in esso contenuti. Non calcola importi né imposte individuali.
Paesi: venti (Italia come riferimento, poi Emirati Arabi Uniti, Singapore, Monaco, Cipro, Malta, Svizzera, Repubblica Ceca, Bulgaria, Croazia, Ungheria, Lituania, Grecia, Polonia, Spagna, Portogallo, Estonia, Romania, Germania, Francia).
Campi per Paese: aliquota sulle plusvalenze (cg) e sui dividendi (div), in %; aliquota sulle pensioni estere (valore e tipo: fisso o progressivo, con il valore indicato come massimo o tipico); imposte patrimoniali (nessuna / solo immobili / sì); convenzione con l’Italia (sì / limitata / paese di partenza); nota descrittiva in italiano e inglese. Gli interessi non sono considerati.
Confronto: l’unico confronto numerico calcolato è la differenza tra le aliquote sulle plusvalenze (in punti percentuali). Gli altri campi sono mostrati affiancati.
Colori dei badge: classificazione grafica delle aliquote (fino al 10%, fino al 20%, oltre); non è un giudizio fiscale. L’elenco può essere cercato e ordinato per aliquota sulle plusvalenze.
Fonte e aggiornamento
Il file indica come data di aggiornamento solo l’anno “2026” e cita come fonti generiche i portali OECD Tax Database, PwC Worldwide Tax Summaries e KPMG Tax rates online, senza riferimenti per singolo dato. Le aliquote sono descritte come massime o tipiche per persone fisiche. I valori non sono stati verificati indipendentemente nell’ambito di questa documentazione.
Limiti. La fiscalità effettiva dipende da residenza fiscale, natura del reddito, soglie, regimi speciali, requisiti di residenza effettiva e norme in vigore, che cambiano spesso. Il significato di “convenzione: sì” non specifica quale convenzione né il suo contenuto. Dati indicativi e semplificati: consulta le fonti ufficiali e un professionista prima di decidere.
Simulazione deterministica
10. Interesse composto e inflazione
Stima il valore nominale di un capitale con versamenti periodici e lo riporta in euro di oggi usando un’inflazione costante. È una simulazione deterministica: rendimento e inflazione non variano nel tempo.
i = (1 + r)1/m − 1 (m = 1 annuale, 12 mensile) fine periodo: V ← V·(1 + i) + C inizio periodo: V ← (V + C)·(1 + i) forma chiusa: FV = PV·(1 + i)N + C·[((1 + i)N − 1)/i]·(1 + i se inizio periodo); se i = 0: FV = PV + C·N Vreale(t) = Vnominale(t) / (1 + π)t rreale = (1 + r)/(1 + π) − 1
PV capitale iniziale (0–10.000.000 €), C versamento per periodo (0–1.000.000 €), n anni (1–50), N = n·m, r rendimento annuo (−20% … 30%), π inflazione annua (0% … 15%). Il simulatore applica il tasso periodico equivalente: dopo m periodi il capitale cresce esattamente di (1 + r). La forma chiusa è usata come controllo incrociato nei test.
Ipotesi e limiti
Rendimento e inflazione costanti; i versamenti restano costanti in euro nominali (non crescono con l’inflazione).
Nessun costo, imposta, spread o sequenza dei rendimenti: l’indicazione è puramente illustrativa.
Il rendimento reale è calcolato con la relazione di Fisher; la differenza semplice r − π è solo un’approssimazione.
Il “totale versato” è nominale (non è rivalutato per l’inflazione).
Esempio con i valori predefiniti (10.000 € iniziali, 5.000 € l’anno a fine periodo, 20 anni, r = 7%, π = 2%): valore nominale ≈ 243.674 €; valore reale ≈ 163.986 €; totale versato 110.000 €; rendimento reale annuo ≈ 4,90%.
Limiti. Non è una previsione: rendimenti e inflazione reali variano, spesso molto, da un anno all’altro. Il risultato non tiene conto della situazione personale dell’investitore.
ARCA LAB · Visualizzazione sperimentale
11. Crisis Clock: metodo e limiti
Osservatorio sperimentale di alcuni segnali di tensione finanziaria ed economica negli Stati Uniti. Non prevede crisi, recessioni o ribassi e non stima la probabilità di questi eventi. Non è uno strumento di supporto alle decisioni di investimento.
STLFSI4: segnale di stress finanziario, peso 50%; osservazione ammessa fino a 21 giorni.
SAHMREALTIME: segnale del ciclo del lavoro, peso 25%; osservazione ammessa fino a 65 giorni.
T10Y3M: differenziale dei rendimenti a 10 anni e 3 mesi, peso 25%; osservazione ammessa fino a 7 giorni. Il segnale è invertito: un differenziale più basso produce un contributo maggiore.
Normalizzazione e indice
Ogni componente è limitata tra 0 e 100 con clip(x, 0, 100) = max(0, min(100, x)). Le soglie sono scelte di progetto, non stime statistiche validate.
S = clip(100 × (STLFSI4 + 1) / 4, 0, 100) L = clip(100 × SAHMREALTIME / 0,75, 0, 100) C = 100 − clip(100 × (T10Y3M + 1,5) / 3, 0, 100) Indice = 0,50 × S + 0,25 × L + 0,25 × C
Countdown simbolico
Data simbolica = ancora persistente + 365 × (1 − indice/100) giorni
L’ancora è fissata alla prima acquisizione valida. Un aggiornamento con indice invariato non la sposta; se cambia l’indice, la data viene ricalcolata rispetto alla stessa ancora. Il tempo visualizzato è la differenza non negativa tra data simbolica e ora corrente. A zero la scala è esaurita: non viene dichiarata una crisi e non avviene un riavvio automatico.
Acquisizione, cache e sospensione
L’acquisizione avviene tramite update.py lato server o workflow, con API FRED se configurata la chiave, altrimenti tramite CSV pubblico. Il browser legge data.json e ricontrolla i dati pubblicati ogni cinque minuti: questo non equivale ad acquisire nuovi dati dalla fonte. Un tentativo fallito non rinnova la verifica della cache. Se manca un indicatore, l’osservazione supera il limite previsto o la verifica valida risale a oltre 48 ore, indice e timer sono sospesi. Il browser sospende il timer anche se il JSON non è leggibile o la sua generazione risale a oltre 48 ore.
Le notizie provengono da comunicati della Federal Reserve, sono separate dal calcolo e non modificano il punteggio. Non viene calcolato alcun sentiment.
Limiti e interpretazione. Pesi, soglie e scala di 365 giorni sono euristici e non validati. Gli indicatori possono sovrapporsi e i dati possono essere rivisti. L’indice non è una probabilità; i giorni non sono un tempo atteso alla prossima crisi. Crisi finanziaria, recessione e ribasso azionario non sono sinonimi. Non usare il risultato per acquisti, vendite o allocazione del capitale.
ARCA LAB
12. PAC costante vs Value Averaging
Simulatore educativo No-Sell, senza vendite né debito. Le due strategie ricevono la stessa riserva iniziale e lo stesso budget mensile. Il PAC mantiene la riserva in liquidità e investe ogni mese il budget meno la commissione; il VA può usare anche la riserva per inseguire il target.
Prima si applicano i rendimenti del mese a investimenti e liquidità esistenti; poi si aggiunge il budget; infine si compra. La commissione fissa si paga solo con un acquisto positivo. Il patrimonio totale include sempre la liquidità. Non sono simulate imposte, spread o quote intere; il rendimento della liquidità è un’ipotesi costante. Gli scenari predefiniti sono artificiali, non storici. Gli shock iniziale e finale sostituiscono un rendimento mensile con −30%; non sono previsioni. Il primo rendimento precede il primo acquisto. Il target può restare irraggiunto.
Elenco dei riferimenti collegati ai modelli, con il tipo di fonte e la relazione con il codice. Citare una fonte non significa che una formula ne derivi direttamente. Per l’elenco esteso vedi la Bibliografia.
Riferimento
Tipo
Rapporto con ARCA
Merton, R.C. (1969), “Lifetime Portfolio Selection under Uncertainty”, Review of Economics and Statistics 51(3), 247–257
Teorica
Struttura di w* in ARCA Allocation (forma semplificata a singolo periodo).
Pfau, W.D. & Kitces, M.E. (2014), “Reducing Retirement Risk with a Rising Equity Glide-Path”, Journal of Financial Planning 27(1), 38–45
Teorica
Ispirazione del reverse glide path; costanti e forma lineare a tratti sono scelte di progetto.
Fonti generiche del confronto fiscale, senza riferimento per singolo valore.
Nessuno strumento ARCA è stato validato empiricamente o sottoposto a revisione paritaria; vedi il Disclaimer.
Introduction
ARCA offers decision-support tools, not market forecasts or guarantees of return. Each tool uses different assumptions and models: this page documents the formulas actually implemented in the site’s code, the main assumptions and the limits of the simulations. Where the code differs from a textbook formula, the code’s behavior is described.
Formulawhat the code actually computes
Assumptionsuser inputs, defaults, model constants
Limitswhat the model does not represent
Interpretationwhat can and cannot be inferred
Documentation checked against the site’s code on 28 October 2026. The example figures are those produced by the tools with default values (or computed with the formulas shown): they are illustrations, not forecasts. All calculations run in the browser; the parameters you enter are not sent to any server.
Tool overview
Ten tools of different nature. The classification reflects how the code actually works.
Asset allocation model
ARCA Allocation
Problem
Split a portfolio between bonds, stocks and gold.
Variables
Age, retirement age, tolerance, CAPE, real bond yield, volatility, gold price.
Result
Three percentages and a range for the equity share.
Limit
Simplified Merton formula, with market inputs entered by hand.
Blog, Learn and Books are editorial content, not tools: they perform no calculations and are not documented here.
Asset allocation model
1. ARCA Allocation
Estimates a reference split between bonds, stocks and gold from age, horizon, stated tolerance and four hand-entered inputs (CAPE, real bond yield, expected equity volatility, gold price).
Measures how close the investor is to retirement. It is a piecewise linear function, peaking in caution at retirement age (reverse glide path).
if a ≤ Aret: H = Hyoung + t·(Hpeak − Hyoung), with t = clip((a − 20) / max(Aret − 20, 1), 0, 1) if a > Aret: H = Hpeak − t′·(Hpeak − Hlate), with t′ = clip((a − Aret) / S, 0, 1)
Constants in the code: Hyoung = 2.5; Hpeak = 8.0; Hlate = 5.0. The shape is therefore a broken line (it rises linearly up to retirement, then falls linearly over S years), not a smooth curve.
Step 2 — Risk Capacity Score
RCS = clip(H · T, 1.5, 13)
T is the stated tolerance: 0.75 (High), 1.00 (Medium), 1.30 (Low). A higher T raises RCS and lowers the equity share. RCS is an operational calibration, not a measure of true risk aversion.
This is the single-period form of Merton’s rule, w = (μ − r)/(γσ²), where ERP replaces μ − r (the earnings yield 1/CAPE is used as a proxy for the expected real equity return, yr as the return on the safe asset) and RCS replaces the risk-aversion coefficient γ. The code does not solve an intertemporal consumption-and-investment problem, does not estimate preferences, allows no leverage or short positions (5–95% limit) and uses no correlations between asset classes.
P is the gold price in USD/ounce; 1397 is the real average since 1980 in 2025 dollars (source cited: InflationData.com); 900 is a standard deviation estimated by the author, not a published figure. Since GS lies between −3 and +3, g in practice varies between 3% and 13%: the 2% and 20% limits in the code are never reached.
The range shown for stocks is obtained by recomputing w* with CAPE × 1.15 and CAPE × 0.85 (±15% change): it is not a statistical confidence interval.
Variables and assumptions
Symbol
Meaning
Range / default
Origin
a
Age
20–90 years; 45
User
Aret
Retirement age
55–75 years; 67
User
S
Reverse glide path duration
5–20 years; 12
User (only matters after retirement)
T
Stated tolerance
0.75 / 1.00 / 1.30
User
CAPE
Shiller P/E or equivalent
10–45; 28
Market data entered by hand
yr
Reference real bond yield
−1% … 5%; 1.5%
Market data entered by hand
σ
Expected equity volatility
8–35%; 16%
User assumption
P
Gold price
800–6000 USD/oz; 4390
Entered by hand (default to be updated)
The “Reference bond profile” slider does not enter the calculation: it only suggests which real yield to look up. Market data are entered manually; the code has a hook for a future data source, not active today.
Example with default values. t = 25/47 = 0.532 → H = 2.5 + 0.532·5.5 = 5.43; with T = 1: RCS = 5.43. ERP = 1/28 − 1.5% = 3.57% − 1.50% = 2.07%. w* = 0.0207 / (5.43 · 0.16²) = 14.9%. zval = −3 (price far above the average, capped at −3), zopp = −0.33 → GS = −1.67 → g = 8% − 1.67/3·5% = 5.2%. Result: bonds 80.6%, stocks 14.1%, gold 5.2%; stock range 11.0%–18.4%. With these inputs the model assigns few stocks because ERP is small relative to RCS·σ².
Other elements of the tool
“How to implement with UCITS ETFs” panel: splits the percentages already computed (emerging markets share 0/10/15/20% of equities; Global Aggregate EUR-hedged bonds or Eurozone government bonds) and shows example tickers for illustration. It is not part of the model and is not a recommendation.
Reverse glide path chart: reapplies the same formula at different ages, holding market data, tolerance and gold share constant.
Sharing and report: encode the parameters in the URL and produce a printable page; they add no calculations.
Limits and interpretation
The result is a reference point derived from a formula, highly sensitive to the inputs (especially CAPE, yr and σ). It is not a return forecast, it ignores taxation, total wealth, required liquidity, other income and personal circumstances, and it does not show that the indicated allocation is optimal. The shape of the glide path, the constants 2.5/8.0/5.0, and the limits on RCS and on the gold share are design choices.
What was removed compared with earlier versions
Earlier versions used a fixed expected equity return adjusted by a link to central bank rates (“TINA”), a “Buffett Mode” with a discretionary bonus to ERP, a six-factor Gold Score (geopolitical risk, macro regime, volatility, dynamic correlation, plus the two current ones) and a logistic function for the gold share. They were replaced because they were not anchored to repeatable observable data or were redundant: today ERP derives directly from CAPE and the real yield, and the Gold Score has two factors.
References: Merton (1969); Pfau & Kitces (2014); Jeske, ERN (2017); Moreira & Muir (2017); InflationData.com. See Sources for the status of each reference.
Conceptual deep dive
2. Lazy Portfolio
The Lazy Portfolio page is an editorial text: it contains no calculators, formulas or numerical parameters of its own, and presents no backtests.
What it is. A static, diversified allocation in low-cost ETFs, rebalanced periodically, with no market timing. The page cites as examples Permanent Portfolio, Dedalo Three/Four/Eleven, Golden Butterfly, All Weather, Core Four and Two Funds, pointing to Dedalo Invest for compositions and backtests.
Static and dynamic. A static allocation does not change with age, horizon or market conditions; ARCA’s dynamic allocation (section 1) recomputes the weights when age, horizon or entered data change. The page suggests using ARCA’s weights as a reference for target weights, rebalancing once or twice a year.
Limits of staticity. The same risk at 30 and at 65; no response to rates or inflation; sequence-of-returns risk (section 4) weighs more close to retirement.
Limits of dynamism. More parameters mean more room for calibration errors and for tweaking assumptions to get the desired result; the complexity must be maintained over time.
Rebalancing. No ARCA calculator simulates periodic rebalancing of a target-weight portfolio, except the assumption of weights rebalanced monthly in the Leverage Lab 90/60 case study (section 7).
Interpretation: the page argues that a lazy portfolio probably remains a robust choice; this is an editorial position, not a result computed by the site.
Currency allocation model
3. Monetary region (Monetary Region Bias)
Estimates the share of the equity component to hold in the currency of one’s monetary region (the euro for the Eurozone), as a function of age. It measures the weight of a currency, not of a country; traditional home bias is geographic.
t = clip((a − 20)/70, 0, 1) s(t) = t²·(3 − 2t) GPEUR = clip(5% + 15%·s(t), 5%, 20%) e = clip(EUR share already in the index, 0, 30%) to add = max(0, GPEUR − e) total EUR exposure = max(GPEUR, e) foreign currencies = 1 − total EUR exposure
Curve values: age 20 5.0%; 40 8.0%; 60 14.1%; 80 19.2%; 90 20.0%. All percentages refer to the equity component only.
Categories and assumptions
The code only distinguishes “EUR” and “foreign currencies” (aggregated). The reference currency menu lists EUR, USD, GBP, CHF, JPY, CAD, AUD and Other, but only EUR has a calculation: for the others “Available in a future version” appears. Countries are not used.
The EUR share already in the global index (default 9%, indicated as an approximate FTSE All-World value) is a user input: the model does not specify whether it refers to the listing currency of the securities or to economic exposure, and does not verify it.
The euro example applies the percentages to the equity capital entered (default €100,000).
The “to add”, according to the page text, can be obtained with a World EUR Hedged ETF or a moderate overweight of Euro Area equities: the calculator does not determine which instrument to use nor the effect of hedging.
Example. Age 45: t = 25/70 = 0.357; s = 0.292; GPEUR = 5% + 15%·0.292 = 9.4%. With EUR share already present at 9%: to add 0.4% (≈ €373 on €100,000), total EUR exposure 9.4% (≈ €9,373), foreign currencies 90.6%.
Limits and interpretation
The shape of the curve (smoothstep) and the 5–20% limits are design choices, not empirical results. The result is not the wealth’s economic exposure to the euro: an ETF’s trading currency does not coincide with the currency in which its companies earn revenues or bear costs, and the model does not compute the effects of bonds, gold, cash and currency hedges. It is neither a return forecast nor a personalized recommendation. The page cites Anarkulova, Cederburg and O’Doherty (2025), whose optimal weights concern national markets and not the denomination currency: they are not directly comparable.
Point-in-time calculator (first year)
4. SWR — Safe Withdrawal Rate
Compares the first-year withdrawal under four rules. It is a deterministic calculation: it does not simulate later years, uses no historical data, random sequences or Monte Carlo, and does not model inflation, returns or rebalancing.
Initial withdrawal rate: percentage of the starting capital withdrawn in the first year (the 4% rule).
Inflation-adjusted amount: in the original rule, later years repeat the initial amount adjusted for inflation; the tool computes only the first year.
Percentage of current wealth: an amount that varies with the portfolio’s value.
Dynamic strategy: changes the withdrawal as wealth or the implied withdrawal rate changes (guardrails, ARVA).
Sequence-of-returns risk: withdrawing during a downturn in the early years can cause permanent losses; it is one reason the rules differ, but it is not simulated by the tool.
The four rules as implemented
Rule
Formula in the code
Notes
1. Fixed real spending (4%)
P₁ = 4% · K
K = remaining capital. First year only; inflation adjustment is not computed.
2. Constant percentage
P₂ = 5% · K
Fixed 5% rate, not editable in the interface.
3. Guardrails
i = D/K; rails 0.8·τ and 1.2·τ; if i > 1.2τ: P₃ = 0.9·D; if i < 0.8τ: P₃ = 1.1·D; otherwise P₃ = D
D = desired spending, τ = chosen initial rate (3–7%). Simplified version: a single check on the first year, without the other decision rules of the original Guyton and Klinger method.
4. ARVA
PVFA = (1 − (1 + r)−n)/r; P₄ = K / PVFA
r = expected real return (0–6%); n = remaining life expectancy, also non-integer, treated as a certain horizon. If r ≈ 0, PVFA = n.
Life expectancy n comes from a table embedded in the code (men and women, every 5 years from 20 to 100) with linear interpolation. The page reports as official anchors ISTAT’s 19.8 years (men) and 22.6 (women) at age 65; the other values in the table have not been verified against the official tables. It is not the complete mortality table.
Example with default values (man, 65, K = €1,150,000, D = €30,000, r = 3%, τ = 5%): P₁ = €46,000; P₂ = €57,500. Guardrails: i = 30,000/1,150,000 = 2.61%, rails 4.0%–6.0% → i is below the lower rail → P₃ = €33,000. ARVA: n = 19.8 → PVFA = 14.77 → P₄ = €77,871 (6.8% of K). The four figures are very different because they answer different questions, not because one is “more correct”.
Limits and interpretation
The 4% is not a universally safe rate: the reference history (Bengen; Trinity Study) concerns specific markets, periods, allocations and horizons. The tool does not estimate success probabilities, final capital or depletion risk, and by using average life expectancy it does not cover the risk of living longer. For such assessments, simulations on historical and synthetic paths would be needed, and are not included. A point result is not a promise of sustainability over time.
Deterministic simulation
5. Accumulating vs Distributing
Compares an accumulating ETF (income reinvested in the fund) with a distributing one (income paid to the investor) at the same total return. The dividend is not an additional return: the unit value falls by the same amount. Differences arise from taxation, timing of taxes and use of dividends.
Accumulating: Vt = C·(1 + r)t; final tax = tg·max(0, Vn − C) Distributing, each year: Vpre = Vt−1·(1 + r); D = d·Vpre; tax = td·D; net Dn = D − tax reinvestment: Vt = Vpre − D + Dn; tax basis += Dn cash-out: Vt = Vpre − D; cash += Dn (earns nothing); tax basis unchanged Final tax = tg·max(0, Vn − tax basis)
C capital (1,000–10,000,000 €), n years (1–50), r annual total return (−5% … 15%), d gross dividend yield (0–8%, measured on the year-end value before the ex-dividend date), td and tg tax rates on dividends and capital gains (0–100%; default 26%). The price-only return is (1 + r)(1 − d) − 1 ≈ r − d. In “cash-out” mode, total wealth (net portfolio + net dividends received) is compared and the IRR of the flows is computed; the comparison reports difference = distributing net − accumulating net.
Model assumptions
Constant return, dividend yield and tax rates; aggregate average tax cost; no loss offsetting (tax is never negative).
Fees, TER, inflation, dividend growth, currencies, stamp duty and differences between income categories are not modeled: the two rates are simplifications, not the taxation of a real instrument.
Cash received earns no return.
2-year example (C = €100,000, r = 7%, d = 3%, td = tg = 26%, reinvestment). Accumulating: V₂ = €114,490, final tax €3,767, net €110,723. Distributing: year 1 gross dividend €3,210 (net €2,375), V₁ = €106,165; year 2 dividend €3,408 (net €2,522), V₂ = €112,711; taxes on dividends €1,721, final tax €2,032, net €110,679. With the default parameters at 40 years the net is €1,134,110 (accumulating) against €935,772 (distributing). But changing the assumptions changes the outcome: with td = 10% and tg = 26% distributing prevails (€1,146,719 against €1,134,110). The choice depends on the assumptions, not only on the type of ETF.
Interpretation: the result measures the effect of the assumptions entered, not of real products. It does not say which ETF is “better” for a person; if periodic income is needed, distributing meets a liquidity need that a comparison on wealth alone does not capture.
Simulation / comparison
6. Bullet vs Barbell
Compares two bond structures with the same duration: the Bullet concentrates maturities at one point; the Barbell splits them between a short and a long leg. It uses a second-order approximation on model bonds (zero-coupon proxy).
The code enforces Ds ≤ Dt − 0.5 and Dl ≥ Dt + 0.5. Since C is convex in D, at equal duration the Barbell always has more convexity than the Bullet (Jensen’s inequality). Variables: Dt target duration (3–15; 7), Ds (0.5–10; 2), Dl (5–30; 15), y₀ starting yield used only for convexity (0–8%; 3.5%), Δy in basis points (−300…+300).
Five-scenario estimate (“estimated Sharpe”)
Parallel shifts p = z·σrates with z ∈ {−2, −1, 0, +1, +2} and weights 6.25%, 25%, 37.5%, 25%, 6.25% (a discrete approximation of a normal); σrates 25–250 basis points (100). In each scenario Δyshort = p − k/2 and Δylong = p + k/2, where k is the slope set (Δylong − Δyshort). Of the scenario sliders, therefore, only the slope is kept: the average level of the shock set does not enter the five scenarios, which are centered on 0 basis points. The ratio shown is E[R]/σ[R], without subtracting a risk-free rate; E[R] contains only the price effect (no coupons or carry).
Example (Dt = 7, Ds = 2, Dl = 15, y₀ = 3.5%): wL = 5/13 = 38.5%; C(7) = 52.3; CBarbell = 89.6. Parallel shift +100 bp: Bullet −6.74%, Barbell −6.55%; −100 bp: +7.26% against +7.45% (convexity advantage). Steepening (short 0, long +100 bp): the interpolated Bullet Δy is 38.5 bp → Bullet −2.65%, Barbell −5.34%: here the Bullet structure is favored. With the default values: E[R] 0.26% (Bullet) and 0.45% (Barbell), σ ≈ 7.0% for both.
Limits. The model ignores coupons, carry, roll-down, credit risk, liquidity, costs and terms above the second; the Barbell is not always superior (the example shows the opposite with a steepening). The E[R]/σ ratio is neither a historical indicator nor annualized on real data: it is a teaching estimate that depends on σrates and on the chosen curve shape.
Simulation on synthetic data
7. Leverage Lab
Shows how leverage, volatility, compounding and costs change the result over time. It uses synthetic returns (not market data) and does not represent any real product. Notional exposure is the market value of the positions; capital is what you own: 1.5× leverage does not mean a 150% maximum loss.
For each period k (252 per year in sections B and C; 12 in D) the log return is: increment of the deterministic path of the assigned compound return + σ·√Δt·(Wk − Wk−1), with W the cumulative sum of sample-standardized normals (mean 0, standard deviation 1, seeded generator). Volatility changes the path, not the end point: the index always ends at the compound return set. The “fall and recovery” scenario takes the index to −40% within the first quarter of the horizon and then lifts it back linearly.
Leveraged instrument (sections B and C)
each period: E ← E·(1 + r); B ← B·(1 + f/ppy); V = E − B; V ← V·(1 − c/ppy) every k periods: E ← L·V; B ← E − V
E exposure, B debt, V net value, L leverage (1–3), f annual financing cost on the leveraged part, c annual instrument cost, ppy periods per year. k = 1 is equivalent to a daily-reset leveraged ETF (the multiplier acts on each day’s return); k = 21 monthly rebalancing; k = 252 annual. If V goes to zero the model stops (no recovery or margin call before the wipe-out): with daily rebalancing this happens if the index loses 1/L or more in a day.
Path dependency. Index: +10% then −10% → −1% overall; with daily 2×: €10,000 → €12,000 → €9,600 (−4%, not −2%). With +10% and +10% the index rises 21% and the 2× rises 44%. The result of a rebalanced leverage is not “leverage × cumulative return”.
Section C compares two paths with the same end point and different volatilities (daily 2× and 3× ETFs). The “volatility drag” (about −½·L²·σ² per year) is only a first-order indication; it does not imply that every leveraged strategy loses value in the long run. The μ/σ² leverage shown as a theoretical indication is computed from the realized daily returns of the simulated path: it is not a recommendation.
90/60 case study (section D)
Monthly log-normal returns for stocks and bonds with sample correlation equal to the value set; same compound return and same volatility by construction. Portfolio A: 60% stocks, 40% bonds. Portfolio B: 90% stocks, 60% bonds and −50% cash, remunerated at the short-term rate (that is, the implicit financing of futures). Each month: return = wS·rS + wB·rB + wC·(short rate/12) − instrument cost/12, with weights reset to target values every month and no rebalancing costs. The volatility expected from the parameters is √(wS²σS² + wB²σB² + 2wSwBρσSσB), with risk-free cash. Defaults: stocks 6.5% / vol 16%; bonds 3.5% / vol 6%; ρ = 0; short rate 3%; costs 0.10% (A) and 0.25% (B); 20 years; €10,000.
Limits. No historical data for NTSX or other products; futures basis, margins, roll costs, tracking error, taxes and forced liquidations are not modeled. Do not confuse these simulations with the real performance of a leveraged ETF, nor attribute to all products the rules of a daily structure. The comparison does not prove the superiority of one portfolio over the other: changing assumptions and seed changes the result.
Simulation / calculator
8. Costs calculator
Compares the growth of capital with no costs against that net of TER, entry cost, exit cost and fixed custody. The calculation proceeds month by month (optional monthly contribution); the chart shows one point per year.
rm = (1 + g)1/12 − 1 (g = annual gross return) without costs: V ← V·(1 + rm) + PAC with costs: V ← V·(1 + g − TER)1/12 + PAC·(1 − s) − F/12, with V0 = C·(1 − s) and V ≥ 0 final net value = Vn·(1 − u); total cost = value without costs − net value
The net monthly rate is equivalent to reducing the whole annual return by TER (g − TER, then compounded monthly). s = entry cost (applied to the initial capital and to each contribution), u = exit cost (once, at the end), F = annual custody in euros (divided by 12). PAC contributions enter at month end, after growth. TER is a continuous annual percentage cost; entry and exit are one-off percentage costs; custody is an absolute amount independent of capital.
The “isolated impact” table repeats the simulation switching on one cost at a time: the items do not add up to the total cost because costs compound on each other.
Example with default values (C = €100,000, g = 6%, 20 years, TER 1.50%, entry 2%, no PAC, exit 0, custody 0): without costs €320,714 (= 100,000·1.06²⁰); with costs €236,348; total cost €84,366 (26.3%). Isolated impact: TER €79,542; entry €6,414; sum €85,956 > €84,366.
Not modeled: bid-ask spreads, broker buy/sell commissions, taxes, tracking difference and implicit costs, inflation, currencies. The gross return is a user assumption and the costs are those entered: the tool does not verify that they correspond to a real product. It measures the effect of the costs entered, not the total cost of an investment.
Data comparison
9. Country tax comparison
It is not a tax simulation: it reads the file paesi-tasse.json and shows, for two chosen countries, side-by-side cards with the values it contains. It does not compute individual amounts or taxes.
Countries: twenty (Italy as reference, then United Arab Emirates, Singapore, Monaco, Cyprus, Malta, Switzerland, Czech Republic, Bulgaria, Croatia, Hungary, Lithuania, Greece, Poland, Spain, Portugal, Estonia, Romania, Germany, France).
Fields per country: rate on capital gains (cg) and dividends (div), in %; rate on foreign pensions (value and type: flat or progressive, with the value indicated as top or typical); wealth taxes (none / property only / yes); treaty with Italy (yes / limited / home country); descriptive note in Italian and English. Interest is not considered.
Comparison: the only numerical comparison computed is the difference between capital gains rates (in percentage points). The other fields are shown side by side.
Badge colors: graphic classification of rates (up to 10%, up to 20%, above); it is not a tax judgment. The list can be searched and sorted by capital gains rate.
Source and update
The file gives only the year “2026” as its update date and cites as generic sources the OECD Tax Database, PwC Worldwide Tax Summaries and KPMG Tax rates online portals, with no reference for individual data points. Rates are described as top or typical for individuals. The values have not been independently verified as part of this documentation.
Limits. Actual taxation depends on tax residence, type of income, thresholds, special regimes, effective-residence requirements and rules in force, which change often. The meaning of “treaty: yes” does not specify which treaty or its content. Indicative, simplified data: consult official sources and a professional before deciding.
Deterministic simulation
10. Compound interest and inflation
Estimates the nominal value of capital with periodic contributions and restates it in today’s euros using constant inflation. It is a deterministic simulation: return and inflation do not vary over time.
i = (1 + r)1/m − 1 (m = 1 yearly, 12 monthly) end of period: V ← V·(1 + i) + C start of period: V ← (V + C)·(1 + i) closed form: FV = PV·(1 + i)N + C·[((1 + i)N − 1)/i]·(1 + i if start of period); if i = 0: FV = PV + C·N Vreal(t) = Vnominal(t) / (1 + π)t rreal = (1 + r)/(1 + π) − 1
PV initial capital (0–10,000,000 €), C contribution per period (0–1,000,000 €), n years (1–50), N = n·m, r annual return (−20% … 30%), π annual inflation (0% … 15%). The simulator uses the equivalent periodic rate: after m periods capital grows by exactly (1 + r). The closed form is used as a cross-check in tests.
Assumptions and limits
Constant return and inflation; contributions stay constant in nominal euros (they do not grow with inflation).
No costs, taxes, spreads or sequence of returns: the output is purely illustrative.
Real return uses the Fisher relation; the simple difference r − π is only an approximation.
“Total contributed” is nominal (not adjusted for inflation).
Example with default values (€10,000 initial, €5,000 a year at end of period, 20 years, r = 7%, π = 2%): nominal value ≈ €243,674; real value ≈ €163,986; total contributed €110,000; annual real return ≈ 4.90%.
Limits. This is not a forecast: actual returns and inflation vary, often a lot, from year to year. The result ignores the investor’s personal situation.
ARCA LAB · Experimental visualization
11. Crisis Clock: method and limitations
An experimental US financial and economic tension observatory. It does not predict crises, recessions or market declines, estimate their probability or support investment decisions.
STLFSI4: financial stress; weight 50%; maximum observation age 21 days.
SAHMREALTIME: labour-cycle signal; weight 25%; maximum observation age 65 days.
T10Y3M: 10-year minus 3-month yield spread; weight 25%; maximum observation age 7 days; inverted contribution.
Normalization and score
clip(x, 0, 100) = max(0, min(100, x)).
S = clip(100 × (STLFSI4 + 1) / 4, 0, 100) L = clip(100 × SAHMREALTIME / 0.75, 0, 100) C = 100 − clip(100 × (T10Y3M + 1.5) / 3, 0, 100) Score = 0.50 × S + 0.25 × L + 0.25 × C
Symbolic countdown
Symbolic date = persistent anchor + 365 × (1 − score/100) days
The first valid acquisition sets the anchor. An unchanged score does not move it; score changes recalculate the symbolic date against the same anchor. Remaining time cannot fall below zero. Zero means the symbolic scale is exhausted, not that a crisis has occurred; there is no automatic restart.
Data acquisition and suspension
update.py runs server-side or in a workflow and uses the FRED API when a key is configured, otherwise public CSV. The browser reloads published data.json every five minutes; this does not acquire new source observations. Failed attempts do not renew cached verification timestamps. Missing indicators, excessive observation age or more than 48 hours since successful verification suspend the score and timer. The browser also suspends the timer if JSON cannot be read or was generated more than 48 hours ago.
Federal Reserve releases provide separate news context and never change the score. No sentiment is calculated.
Limitations. Weights, thresholds and the 365-day scale are unvalidated heuristics. Indicators may overlap and data may be revised. The score is not a probability and the days are not an expected time to a crisis. Financial crises, recessions and stock-market declines are different events. Do not use this tool for investment, buying, selling or allocation decisions.
12. Fixed PAC vs Value Averaging
Educational No-Sell model, with no sales or borrowing. Both strategies receive the same initial reserve and monthly budget. The fixed plan holds the reserve in cash; VA may invest it. Returns apply to existing assets and cash before the monthly budget is added and purchases occur.
The fixed plan buys the monthly budget minus its fee. Fees apply only to positive purchases. Total wealth includes cash. Taxes, spreads and whole-share constraints are excluded. Preset scenarios are artificial, not historical; early and late shocks replace one monthly return with −30%. The first return precedes the first purchase. Targets may remain unmet.
List of the references linked to the models, with the type of source and its relationship to the code. Citing a source does not mean a formula derives directly from it. For the extended list see the Bibliography.
Reference
Type
Relationship with ARCA
Merton, R.C. (1969), “Lifetime Portfolio Selection under Uncertainty”, Review of Economics and Statistics 51(3), 247–257
Theoretical
Structure of w* in ARCA Allocation (simplified single-period form).
Pfau, W.D. & Kitces, M.E. (2014), “Reducing Retirement Risk with a Rising Equity Glide-Path”, Journal of Financial Planning 27(1), 38–45
Theoretical
Inspiration for the reverse glide path; constants and piecewise linear shape are design choices.